Upgrade Your Filtration System With Industrial Water Treatment 4" Automatic Self Cleaning Filter
how a typical automatic self-cleaning filter works:
Filtration Process: Fluid flows through the filter, and particles or impurities are trapped on the filter media or surface.
Accumulation: Over time, the trapped particles accumulate on the filter element, causing a pressure drop across the filter and potentially affecting the efficiency of the filtration process.
Detection: Automatic self-cleaning filters often incorporate sensors or monitoring devices to detect changes in pressure, flow rate, or other parameters that indicate the need for cleaning.
Cleaning Mechanism Activation: When the filter reaches a predetermined level of contamination, the cleaning mechanism is activated. This can be triggered by a timer, differential pressure switch, or other control mechanism.
Cleaning Process: The cleaning mechanism typically involves reversing the flow of fluid, backflushing, or mechanically agitating the filter element to dislodge and remove the accumulated debris. This can be achieved using mechanisms such as rotating brushes, jets of water or air, or vibration.
Disposal of Debris: The dislodged particles or debris are then flushed away from the filter and collected or discharged from the system.
Return to Filtration: Once the cleaning cycle is complete, the filter returns to its normal filtration mode, ready to continue removing impurities from the fluid.
Product Parameterss
| Model | Dimension | Inlet&outlet | Max. flow | Pressure | Micron | Motor |
| CS-250-50 | φ273*1000 | DN25~DN50 | 50 t/h | 10bar | ≥50μm | 0.18kw/RV040 |
| CS-300-100 | φ325*1200 | DN80~DN125 | 100 t/h | 10bar | ≥100μm | 0.37kw/RV063 |
| CS-400-150 | φ426*1300 | DN150 | 200 t/h | 10bar | ≥200μm | |
| CS-480-200 | φ480*1550 | DN200 | 300 t/h | 10bar | ≥300μm | |
| CS-530-250 | φ530*1650 | DN250 | 450 t/h | 10bar | ≥300μm | 0.75kw/RV075 |
| CS-600-300 | φ600*1750 | DN300 | 550t/h | 10bar | ≥300μm | |
| CS-700-350 | φ700*2000 | DN350 | 700t/h | 10bar | ≥500μm | |
| CS-800-400 | φ800*2150 | DN400 | 1000t/h | 10bar | ≥800μm | |
| CS-900-450 | φ900*2300 | DN450 | 1200t/h | 10bar | ≥1000μm | |
| CS-1000-500 | φ1000*2500 | DN500 | 1500t/h | 10bar | ≥1500μm | |
| CS-1100-600 | φ1100*2600 | DN600 | 1800 t/h | 10bar | ≥3000μm | 1.5kw/RV090 |
| CS-1200-700 | φ1200*2800 | DN700 | 2300 t/h | 10bar | | |
| Note: Material :galvanized steel /Stainless steel ;
Customization Accepted ; |
Automatic self-cleaning filters offer several advantages, including reduced maintenance requirements, continuous operation without interruption for manual cleaning, and improved efficiency and reliability of the filtration process. These filters are commonly used in various industries, including water treatment, wastewater treatment, oil and gas, chemical processing, and food and beverage production, where maintaining clean fluid streams is essential for operational efficiency and product quality.
Applicated in below industry:
Food and drink: juice, honey, syrup filtration.
Water treatment: urban water supply, industrial water filtration; Power plant condensate filtration.
Metal processing: cutting fluid and coolant filtration; Lubricating oil filtration.
Fine chemicals: catalyst, fermentation liquid filtration; Filtration of cosmetics raw materials and finished products.graphene
Petrochemical industry: aviation kerosene filtration; Oil and fuel filtration.
Detailed Images
FAQ
Q1 : Where is your factory located?
A1 : Qingdao crowns machinery co.,ltd is located at Huangdao district ,Qingdao city, China
Q2 : Are you an integrated supplier for industrial filter machine ?
A2 : Yes, we can provide the complete solution line to customer according to customer’s requirement.
Q3 : How about the quality control in your factory?
A3 : Qingdao crowns has the SOP (Standard Operation Procedure) and all the production step must follow
up this SOP. Every machine needs at least automatic running over 72 hours and must be inspected carefully
before shipment.
Q4 : Will you offer the pre-sales service?
A4 : Yes, we have an experienced pre-sales team to support customers not only including machine, technology
also water electrical,machine layout in factory, etc.
Q5 : What about the after-service? Will you send your engineer to my country to help commission and install the
machine?
A5 : Surely, we have many experience technical engineers for oversea service, they would help you install machine
and support training to workers also.
Q6 : What is the delivery time of the machine?
A6 : Actually, the delivery time of the machines is depended on the machine options. Normally, the delivery
time of standard machine could be within 10-30 days
Q7 : What is the warranty of the machine ?
A7 : The whole machine’s warranty period is 12 months and key parts will be depended.
Q8 : Do you provide any spare parts with machine?
A8 : Yes, CROWNS will provide one set standard spare parts to customer according to different machines
